XZBELT publishes conveyor belt specs and compliance documents

Xuanze Industrial Drive Systems (Shanghai) Co., Ltd. has released technical and compliance documentation for its XZBELT conveyor belt range, including CE, ISO 9001, laboratory and FDA-related records. The materials spell out how belt construction, tension, surface design and pulley geometry affect stability, wear and application fit.

Why it matters: - The published specifications show that conveyor belt stability depends on the full design package, not just thickness or material name. - The compliance records give buyers a way to check scope, food-contact status and chemical parameters before trial orders. - The documents matter for applications where belt stretch, grip, release and temperature resistance directly affect uptime and product quality.

What happened: - Xuanze Industrial Drive Systems (Shanghai) Co., Ltd., which trades under the XZBELT brand, published technical and compliance documentation for its conveyor belt range. - The package includes a CE Technical Inspection Attestation of Conformity, an ISO 9001:2015 certificate, a GALAB laboratory test report and SGS-CSTC FDA compliance test reports. - The company also released technical guidance on construction choices, operating limits and selection factors for different belt types.

The details: - The CE Technical Inspection Attestation covers the conveyor belt product and references Machinery Directive Annex VIII. - ISO 9001:2015 certificate 62725Q1200R0S was issued by JingXin Certification (Beijing) Co., Ltd. under GB/T 19001-2016 idt ISO 9001:2015. - The ISO certificate is valid from 1 August 2025 to 31 July 2028. - The stated ISO scope covers sale of industrial transmission and conveyor rubber and plastic belts, refractory fibre rope and high-temperature resistant fibre braided casing. - Published material options include PU, TPU, PVC, PVK, PA, nylon, polyester, Nomex, felt and silicone, with customized combinations available. - Food-grade options listed for the range are PU, TPU, PVC, silicone and felt. - Top cover material can be specified as PU, TPU, PVC, silicone or felt. - Bottom cover material can be specified as fabric, PU, PVC or felt. - Fabric ply options include polyester, nylon or polyamide. - Documented construction limits for the conveyor belt range include thickness from 0.8 mm to 8 mm, 1 to 3 plies, selected temperature capability from −20°C to +220°C, and surface patterns including smooth, matt, diamond, golf, crescent and rough top. - Fabrication options include cleats, sidewalls, V-guides and perforation. - The company says belt life depends on carcass, cover material, tension, pulley size, wear, joint quality, tracking and operating environment, and thicker belts do not automatically last longer. - Published tensile force at 1% elongation ranges from 5 N/mm for selected flat belts to 175 N/mm for selected polyester coil wrapper belts. - The felt conveyor belt is specified at 15 ± 3 N/mm at 1% elongation and 20 ± 4% elongation. - The seamless belt is specified at 30 N/mm at 1% elongation, with tensile strength of 350 N/mm at 3% elongation. - The coil wrapper belt RUX80-GW is specified at 80 N/mm at 1% elongation, with selected aramid types up to 140 N/mm. - The same coil wrapper belt line includes a maximum belt tension of up to 175 N/mm at 2% elongation for selected polyester types. - RUX80-GW ultimate tensile strength is listed at 400 N/mm. - The flat belt range is specified with elongation at fitting between 0.3% and 8.0%, depending on the tension member. - The seamless belt is specified as recoverable after 2.5% elongation. - The seamless construction is a single-layer, seamless-woven belt with total thickness of 9 ± 0.5 mm, made from a 6 mm base band and a 3 mm surface coating. - The seamless belt uses silicone, Nomex fibre and polyester filament fibre. - Joint options across the range include hot melt joints, finger joints, Z-splice, stepped Z-splice, overlap joints, tooth joints, steel buckles and mechanical fasteners. - The coil wrapper belt RUX80-GW is specified with peel strength of 8 N/mm. - The company also offers truly endless, seamless, no-splice variants. - Published troubleshooting material lists unsquared belt ends, incorrect preparation, wrong press parameters, excessive tension, minimum pulley violations, misalignment and chemical contamination as recurring causes of repeated splice failure. - The felt conveyor belt has a coefficient of friction of 0.19 ± 0.06 and air permeability of 12 ± 5 l/dm²·min. - The felt belt is compatible with vacuum suction systems and has surface and volume resistance below 1×10⁹ Ω for antistatic performance. - The felt belt is intended for CNC cutting, textile and garment, leather processing, automotive and tyre, nonwoven processing and composite material cutting. - The felt belt has a minimum turning diameter of 30 mm and a reverse turning diameter of 60 mm. - Standard felt belt width is 3,000 mm, maximum width is 3,100 mm, and roll lengths are 100 m or 200 m. - The coil wrapper belt RUX80-GW has a coefficient of friction of 0.8 against steel plate. - Available surface finishes across the range include ground, smooth, felt and high grip, with smooth, matte, rough and low-friction options on the general conveyor belt line. - Perforation and profiled surfaces are also available where the machine requires them. - Temperature ranges are type-specific and cannot be inferred from color, thickness or material name. - The felt conveyor belt is rated from −20°C to +120°C. - The seamless belt is rated from −40°C to +210°C. - The coil wrapper belt RUX80-GW is rated from −20°C to +120°C, with selected cold and temperature types from −10°C to +130°C. - Selected aramid high-temperature coil wrapper types can reach up to 350°C maximum coil temperature. - Oil resistance, emulsion resistance, cut resistance, impact resistance, wear resistance, chemical resistance and heat resistance are listed as configurable properties across relevant belt types. - Antistatic and antimicrobial features are available on the general conveyor line. - GALAB test report number P2024153524 / GCH24-0580 was issued by GALAB Laboratories GmbH on 29 October 2024. - The GALAB report covers alkylphenols, alkylphenol ethoxylates, bisphenols, phthalates and related chemical parameters for the conveyor belt and seamless belt products. - The lab is accredited to DIN EN ISO/IEC 17025, and the report is referenced to the Germany / EU market. - The seamless belt and the coil wrapper belt RUX80-GW are both specified for maximum operating speed of 400 m/min. - Belt mass ranges from 1,300 ± 150 g/m² for the felt belt to approximately 4.3–9 kg/m² for selected coil wrapper types. - Width capability spans 3,000 mm standard and 3,100 mm maximum for the felt belt, up to 1,900 mm for selected cold wrapper types, up to 1,600 mm for selected temperature types, up to 3,400 mm for selected hot types and up to 47 inches for selected flat belt types. - Coil wrapper belt length is specified up to 108 m for selected types. - Minimum pulley diameter is 30 mm forward and 60 mm reverse for the felt belt. - Minimum pulley diameter is 40 mm for selected flat belt types. - Minimum pulley diameter is 70 mm forward and 120 mm reverse for the seamless belt. - Minimum pulley diameter is 90 mm forward and 120 mm reverse for the coil wrapper belt RUX80-GW. - Two FDA compliance test reports cover the conveyor belt range under US FDA 21 CFR 175.300 for total extractives. - SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. issued certificate SHAFD2101526402 on 20 February 2021 and certificate SHAFD2102055302 A01 on 19 February 2021. - The certified products include PVC, PU, PE, PVK and silicone conveyor belts. - A separate FDA compliance record also covers the seamless belt and flat belt products. - XZBELT was established in 2013 and operates two manufacturing bases with a combined production area of about 30,000 m². - The specialty belt processing facility in Changxing, Huzhou, Zhejiang Province, covers about 3,000 m² and has more than 20 sets of specialized production and processing equipment. - That facility includes six belt splicing machines, two Coil wrapper belt coating production lines, two seamless fabric weaving machines, three silicone coating lines and three seamless PU coating lines. - The joint-venture roll material base covers about 27,000 m² and operates twelve PU and PVC production lines. - The company states monthly capacity of about 166,000 m² for PU and PVC roll materials. - Standard products have a stated lead time of seven days. - XZBELT says it holds 11 belt-related patents, including two invention patents and nine utility model patents. - The company reports exports to more than 150 countries and regions and an export ratio of about 60%. - A packaging machinery distributor and carton packaging manufacturer reported using more than 1,000 belts annually over 24–30 months of continuous operation, with replacement frequency reduced by about 40% and feeding accuracy and stability improved. - A large aluminium profile manufacturer reported 50-plus belts per year over more than 12 months of continuous operation, with maintenance frequency reduced by about 30% and production efficiency increased by about 20%. - Other published cases include about 1,300 m of belt used in airport baggage sorting and handling over three years, PVC and PU conveyor belts supplied for OEM replacement applications, and food-contact compliant belts reported in service for two to three years.

Between the lines: - The documentation is built to show that application fit depends on matching multiple variables at once. - The most important mismatch risk is treating a single spec, such as thickness or material type, as proof of suitability. - The company’s own guidance reinforces that food-contact, temperature and pulley requirements must be verified at the model level. - The installation cases suggest the belts are being positioned for both industrial automation and heavier-duty material handling, but the examples are not general performance guarantees.

What's next: - Buyers will likely use the published brochures and compliance records to screen shortlists before trial orders. - The company says additional technical information is available in its published documentation and on its official website. - Quotation requests are expected to focus on belt dimensions, product or strip temperature, material, line speed, tension, pulley diameters, oil or emulsion exposure and the existing belt specification.

The bottom line: - XZBELT is marketing conveyor belts as a specification-driven product family, where drive stability comes from matching the right construction, not choosing the thickest or highest-friction belt available.